Request for RTO Canister Design (Metric Units)
Please Provide as Much Information As Possible
Questions? Call Lantec Sales: 818-707-2285
MLM for RTOs product page - click here

Design Basis Click here for the form in british units
Source of Contaminated Air:
Contaminants:
Average VOC Loading: % of LEL,  or mg/Nm3,   or kg/hour
Peak VOC Loading: % of LEL    or mg/Nm3,   or kg/hour
Peak Particulate Content: mg/Nm3
Peak Water Vapor Content: % (v/v)
Inlet Air Flow: Nm3/hr
Inlet Air Temperature: °C
Comments:
Oxidizer Characteristics
Combustion Chamber Temperature: °C
Desired Thermal Energy Recovery: % of available heat
Desired Thermal Efficiency: % of preheat energy
Average Burner Air Flow (during operation): Nm3/h
Number of Heat-Recovery Canisters:
Average Purge Air Flow (if >2 canisters):
Valve Switch Time: sec/canister
Total Cycle Time: seconds
Allowable Pressure Drop: mbar
Comments:
Upgrading an Existing Oxidizer? If so... If a new RTO, proceed to "Contact Info".
Canister Dimensions (inside insulation): mm x mm, or diameter mm
Current Type of Media
Current Depth of Media mm
Current Thermal Energy Recovery %
Current Pressure Drop mbar
Contact Info ---------------------> Lantec will only reply to design inquiries with contact information completed below:
Your Name
Company Name
Company Address
Telephone Number
Email
Comments